Konica Minolta Printer Error Code C-3102 Remove Solution Steps CALL- +1-855-834-2054

The printer may be a necessary device to print out your important documents. you’ll use it at your home and office to print your documents. Konica Minolta printer fulfils modern-day requirements, and that they are widely used for both home and business purposes. But many users encounter some common errors like Minolta printer error Code C-3102. If you’re one among those that are affected by this error then don’t worry. you’ll easily solve your problem with none difficulty.

In this blog, we offer one among the simplest solutions for your help. Through these solutions, you easily remove this issue with none difficulty. This technical error can create a worse situation, and particularly during that point once we are in urgent need of a tool. this is often one among the foremost preferred brands in terms of fulfilling printer needs, you’ll easily approach to Konica Minolta support team for any help regarding its technical error.

Easy steps to repair Konica Minolta Printer error C-3102

If you face error code C-3102 with this printer then don’t worry. Here we offer one among the simplest solutions to repair this issue instantly. to get rid of this issue as soon as possible follow the below-mentioned steps in sequence.

Code Reset:

  • First of all, cut the most power button.
  • After that, switch the most power button on while pressing the utility/counter key. Keep holding it till the difficulty reset appears.
  • Click “trouble reset” then choose copier, the system management screen will open. Hit the copier button on the screen.
  • Now check to form sure that “OK” is shown and it’s been reset.
  • After switching off the most powerful switch of your printer, wait 10 seconds and fire the machine copy, this could reset the service code and with any luck, the machine will run.

Even if the above fixes are shown in error code. Then check these all things

It’s probably the sensor on the fuser that detects rotation I feel it’s PS-47. they need to have issues with the mounting plate but at any rate, at that time, it might be time to call your servicing entity. 

  • Check Fusing release drive motor.
  • Home release sensor.
  • Check the connector of M3 for accurate drive coupling.
  • Remove Fuser Rotation Sensor Holder (p/n A00J 7323 01).
  • Remove PRCB.

After you replace the part, you’ve got to reset the printer in serves mode.


We hope these solutions will assist you to unravel your problem in less time. If you face any difficulty to unravel this error or the solutions fail to get rid of this error code then you’ll be ready to contact the experts with ease. For your help, we also provide the Konica Minolta customer service team which helps you to eliminate the whole issues regarding this printer. you’ll also contact us via our toll-free KONICA MINOLTA SUPPORT PHONE NUMBER +1-855-834-2054.

konica minolta printer support phone number

Add a Comment

Your email address will not be published. Required fields are marked *